Description
Ion-Bond Armor is a subsurface elastomeric sealer for concrete, brick, and masonry. Penetrates up to 1.5 inches into concrete (3 times deeper than other siloxane sealers). Chemically reacts to form a hydrophobic barrier deep inside the substrate. PENETRATES Up To 2″ Into Concrete, Brick, or Masonry (3 x deeper than a typical siloxane sealer)
- PREMIUM-GRADE CHEMISTRY – The Only Siloxane Able to Seal Against Negative Side Water Pressure.
- PERMANENT – No Re-Applications Needed. Virtually Indestructible.
- PAINTABLE – Leaves Surface Suitable for Paints, Adhesives, or Thinset
- PAINTED & SMOOTH CONCRETE – So Penetrating That It Even Waterproofs Through a Single Layer of Latex Paint. Smooth Concrete Does Not Require Etching.
Use for waterproofing basements, foundation slabs, retaining walls, outdoor concrete, bricks, and pavers. The only silane/siloxane sealer able to withstand negative-side hydrostatic pressure.
Use Ion-Bond Armor on concrete blocks and cinder blocks after sealing them first with RadonSeal Plus.
Before installing flooring on concrete slabs, use Ion-Bond Armor after sealing first with RadonSeal for the tightest possible seal against water vapor.
- Waterproofs – Indoor/Outdoor Concrete, Brick, Porous Masonry.
- Highly Penetrates – Penetrates up to 1.5″ into concrete three times deeper than typical siloxane sealers. Penetrates into most hard-troweled concrete surfaces.
- Negative Side Water – Durable to seal against hydrostatic pressure. Stops water wicking by capillary action. Most homeowners are not aware that common “waterproofing” silane/siloxane or acrylic concrete sealers are not suitable for basements because they get pushed off by negative water pressure.
- Ultra-Low VOC – No fumes. No odors. Waterborne, non-toxic, non-flammable, noncorrosive. Earth-friendly.
- Long-Lasting Seal – When used indoors and on walls, the waterproofing seal is practically permanent!
- Slip Resistant – Does not coat the surface. Does not alter surface friction. Leaves the natural appearance of the concrete.
- Paintable – Leaves the surface suitable for paints, adhesives, thin-set, and patching compounds.
- Breathable – Does not trap water. Minimizes the infiltration of water vapor and gases, while still allowing the substrate to dry out.
- Humidity – Aids in reducing water vapor transmission through the substrate.
- Penetrates Latex Paint – Latex paint is porous. If one layer of latex was used in the past and removal is not feasible, Ion-Bond will penetrate and can help waterproof the concrete.
